shocker break beam eye milling

[balf]

ok so ive been thinking about this for a while and i think its worthwhile once i drop a virtue in so its all nice and compatible...

where the hell can i get my shocker milled to accept breakbeam eyes.

and before sombody says it no i dont want an NXT because the only real advantage is the BB eyes, and they look butt ugly

balf

 

[ION_CRAZY]

you could get it done in the states. If you plan on using a shocker board, the BB eyes for the NXT are different than the SFT, they are held in by the eye cover screw slightly, so whether you need to have screw holes made for NXT detents you will have to find out, the NXT eye cover is also different that the sft. I think that if you look on pbnation there are a couple of small companies that do it for about $100.

 

[Tom Allen]

I've looked at doing it, but it's too risky with the airways so close.

 

[ION_CRAZY]

indeed, and if the eyes are off by a tiny amount, your gun wont work, then even if you put your bouncebeams back in it wont work.

 

[balf]

i know which is why i was asking.

dont really want to send it to america. if i do ill get a spare body anyway

 

[ION_CRAZY]

Shocker NXT stock bodies are going for about $200, so you can import one, also, SP would probably sell you one

 

[balf]

now you see the reason i want my sft milling is because nxt bodies are ugly as sin and they weigh a bit more

 

[Tom Allen]

the hole that takes the eye wires passes very close to the main air feeds, just one degree out on either x or y axis and the body will be useless.

 

[balf]

is it really that close?



damn

 

[Bob]

pm the guy that at zdspb.com he does it and i'll do business from the UK. Helpful guy too.