shocker blackheart board problem

[Hash47]

Well i bought a shocker SFT off here a week or so before x-mas and only just got around to having a proper look at it (inside)

Aa you might tell from my post count i am pretty new to here and paintball, so not too srue about this.

so, i replaced the 9v battery in the gun and tried the pwoer botton but it still didnt power up. Any ideas what the problem might be?

 

[crazy-lacey]

check the wire harness between the lower and upper board are connected properly if they are you could check with a multi meter that there is no breaks in connections from the + rail etc

 

[Big Mac]

what grips/grip screws have you got on the shocker?

It could be that you have screwed the screws in too far and as such they have mashed into the upper board (the one on the solenoid) in which case it will need replacing.

Also give different batteries a try.

 

[Bob]

Make sure the black cable is not stuck between the board and the on/off button. Check that the on/off button is connecting with the switch.

 

[Hash47]

thanks for the suggestion ill try them tonight when i have some time. Ill elt you know if they work.

 

[Madtoxic]

remove the grip frame and check the power button on the upper board .