shego

[infest]

right i just got my project thought the post .

i tried the reg that was sent with it but think it needs sort as its kinda blasted air into marker lol.

so i fitted a ion reg in th ego 5 frame fits ok fitted the asa no leaks as far as i can tell .so i turned on ego frame i can see the bolt moveing back and forward but its kinda really lame speed wont even pop a ball out of the barrel . i turned up the reg to max so was at 220 was a littel better .

any ideas what the board should be set at .
timming

at the moment its 12bps
fsdo 1.0 ms
dwell is 6.5 ms

fillter

empty 2 ms
tt tol 4%
tt 1 band 80%
release 4ms
pull 0 ms
ball 1 ms

mode semi

best i can do have looked on line but cant see any where that might have the settings

any help would be great

many thanks mark

 

[Stencil]

Defiantly increase your dwell. Around 12 - 13 will probably suffice.

Obviously, if then you start getting FSDO increase the FSDO setting.

 

[blebit]

Dwell looks very low assuming its a shocker bolt. Try some of these settings :

http://www.zdspb.com/tech/mguide/shockersft/adj_electronics.html

 

[spangley_special]

as said thats a silly low dwell raise that.

Which noid is it? ego, parker or humph?


oh and turn the reg back down before you do some damage to your the noid

 

[infest]

with out looking think its a humph . ill try the settings see how i go and let you know tommrow night .