Screw problem!!!

[Seisure]

I have a screw in my shocker (the back one that holds the grip in) and the allen key thread is gone on it so I cant screw it out. Any ideas on how to get by this.

I also tried cutting a line in it for a screwdriver but it still didnt work!!!

 

[Jakey C]

Use some strong glue to glue an allan key in leave it over night and try in the morning, Drilling it may end up disasterous being right next to the board and all

 

[Bob]

its possible to use a hammer and a centre punch to unscrw if there is enough spare material left.

If not leave it to the experts and send it to warped or HPgear.

 

[Ranger]

is the screw counter sunk into the body...if not you could try using a small pair of pliers and gently turn the screw....the best sort are found on the leathermans tools as they are nice and small with a good grip...
small warning though...be carefull of the anno....i used this to release a screw on an ion (yes i know crappy powder coat etc etc) and it has wrecked the area around the screw...but then i needed the screw off so ce la vie.

 

[Seisure]

Thanks lads appreciate all the help.

 

[Tom Allen]

very apt username.