Reloader issue

[Tommy210]

I am looking for little help with my Reloader.

It seems that even if I put fresh batteries after a day of playing the Reloader has problems to feed. When I change the batteries it is back to normal.

I have it for about a year now and just wondering if anyone had same problem.

As example I can use this weekend on Sunday I have put new batteries in and by the evening I had problem with the paint feeding.

I went through about three boxes of paint so it should not really eat batteries that fast.

Any similar issues anyone?

Cheers
210

 

[TinFish]

try putting it on the fastest speed setting..i had similar problems that were solved by doing that.

also you shoud strip it and give it a good clean.

 

[Tommy210]

I did strip it completaly and cleaned what I could

I am bit worried that if I put it on fastest speed it will start breaking paint.

 

[thomas111]

do you have a derlin drive cone i no some cones can cause balls to get caught at the top of the feedneck just before it goes down in to the breach as i have a derlin cone on my spare reloader b that does this

 

[Tommy210]

I dont mate

Is it possible that maybe the board is somehow short circuited and killing my batteries?? Moisture or something??

It really is little strange...

 

[thomas111]

i would say it is a fault on the board then

 

[Will L]

Double check that you didnt split or pinch any wires when putting it back together and check for damage on them. Or the board could be just ^*&£!

 

[Wells Jnr]

Have you changed the brand of batteries you are using? I know that some shops "own brands" arent as good as the like of duracell etc.

 

[Tommy210]

Have you changed the brand of batteries you are using? I know that some shops "own brands" arent as good as the like of duracell etc.

Dude, I am using the best you can get Duracell all the way!!

The setup is excatly the same, no chnage at all, it was working past year and now it is not...

Anyway, I have new board on the way so I wil see it might solve the problem

 

[PreacherMan]

our team use reloader b's on fast setting (three green blinks) and do no get breaks so you should have no problem