Reloader B Feed Problem, Any Ideas ?

[Red]

Hi,

Hoping someone here is going to know the answer to this. My Reloader B turns on, but doesn't do the half a spin of the rip wheel when it powers up now.

I've changed the batteries out for fresh ones and it doesn't make any difference it just won't feed the balls through.

The hopper flashes the green light intermitently as usual indicating it's powered up and working OK, however won't spin.

Any ideas guys ?

 

[Scars]

check your drive done

9/10 the little plastic pin with catches has broken off as the stock drive cones are only brittle

 

[Fish]

Take it apart, so that you have the motor, board, and batteries all to one side; then power it up and see if the motor is still actually working.

This I find to be a more common replacement than the drive-cone; they seem to fry a lot; though for the sake of about £8 you practically have a brand new loader speed wise