???regulators???

[pirahna_punk]

hey, i was wondering i have an expansion chamber and a low pressure chamber would it still be benificial for me to get a regulator i went to a paintball shop and he said i shouldnt yet ive seen may people with the regulators in pictures with those extras and i cant ask anybody around here because me and my friend are the most knowledgable and we still cant figure this out

 

[cowface]

regs r to,errrm, whats the word i am looking for,???eerrr,

it gives more consistancy for ur air and Co2?? i think, cant remember,
i think it filters the Co2.

 

[KillerOnion]

A regulator is much better than an expansion chamber...get rid of the xchamber and replace it with either a PMI or WGP reg. Regulators stabilize the pressure of gas going into your gun, making it shoot at a more consistent velocity. Be sure to keep your gun pointed level or up, never down, so that liquid co2 doesn't drain into it and cause velocity spikes and/or freezing.

 

[pirahna_punk]

ok i know wut the dag um thing does but for one how do i take my expansion chamber off. It is the kind were if u take it off the only thing that fits up in there is ur c02 not your bottom line. is there some kind of adapter???? were i can still keep my bottom line and not have to put my c02 in the actualy front of the gun???/

 

[tyguy]

A PMI Pure Energy (PE) regulator will screw in where your expansion chamber is, and should be about the same length. A gas line will hook up the PE regulator to the bottom line ASA adapter.

The PE regulator is a decent regulator, but not the best out there. What's nice is that it handles co2 well, costs about $50 (american), and is a fairly comfortable grip. It's the same regulator used on the Piranha Pro G3 TS and Pro G3 EXT.

 

[pirahna_punk]

o thats prettty bad ill have to check into one of those

 

[tyguy]

Here's a link to an online place selling PEs:
http://www.actionvillage.com/031-1000.html

Notice the regulator doesn't have a gauge, though. You'll need to find a gauge for it so you can tell what the output pressure is.

What type of Piranha are you working on?

 

[pirahna_punk]

i have a low budget lol piranha sts core it looks a lot like the g3 but without the vertical feed

 

[steven09 (Exodus Capt)]

depends on what marker you have
if you have a mag i def recomend of expansion chamber