Regulator help

[Andyb117]

Bought a tank and regulator during the week and think the regulator might be knackered. The tank is dye throttle 1.1l but not sure what make the regulator is.

I was aware when i bought it that there was a burst disk missing and the reg might need replaced. However i would like to know if anyone here can tell me the make of the regulator. There is a Dye pressure gauge but i cant find any reg the same shape as the one i have. Pic below;

Regulator;

http://postimg.org/image/3prz410vz/
http://postimg.org/image/nulj9hupr/
http://postimg.org/image/oy5nlgfcv/

Also this might be a silly question but do all regulators need 2 burst disks? high pressure and a low pressure?

Im very comfortable taking the reg apart and putting it back together but my knowledge is a bit short on servicing regs and knowing what to look out for - any tips/advice always welcome

Thanks!

 

[Marc0]

Yeah that's a Dye Throttle Reg, but looks a bit beat up

You need a high (7500psi) and low (1800psi) burst disk on this type of reg.

Either that or grab a new reg to be sure.

 

[Andyb117]

Yeah i think im going to buy a ninja reg and save myself the hassel of trying to get it in working order. Thanks Marc0!