Razorback 2

[fella]

I have just bought a Razorback 2 were would I get a set of seals ?

 

[I used to good.Honest]

I have just bought a Razorback 2 were would I get a set of seals ?

razorback as in the old pump?

 

[fella]

Yes the old pump.

 

[I used to good.Honest]

most o rings for it you can get at any diy place. the cup seal for the stem is the only part you can't get from a diy place. I don't know anywhere you can get them

 

[fella]

Great just ordered a universal seal kit of eBay so hopefully there will be some to fit this and another couple of guns I have to fix.

 

[Canon Fodder]

Is it leaking? Cup seal is the only thing I think that could really go on them.

 

[fella]

Yes you pumped it forward it dumped a load of gas then when you fired it it dumped a load more.A small CO2 lasted ten shots.

 

[fella]

My friend has an original he bought in 1988 still on original seals and it has been used recently and still works ok.

 

[Canon Fodder]

So if its sat with the pump handle forward there is no leak? If its leaking as you pull the pump handle back then firing a lot of gas when you shoot then it sounds like the main spring is too strong. Take out the bolt and see if its adjustable (does it look like a big Allen key will fit in it), if so from the front of the bolt turn it anti clockwise to decrease some pressure on the main spring.

 

[fella]

Just showed my mate who has one he said its as new never been used.He stripped and it and its all like brand new.Seals removed and refit and it works spot on.Thanks.