Ramping a stock Etek?

[matt_don]

Is this possible?

If so, how do I do it?
If its in the manual... I dont have one so dont say 'read the manual' lol

Thanks

 

[SteRoberts]

Hold gun in hand, screw in filled up air bottle, make sure barrel is screwed on, dont look down barrel with gun on, attach hopper, if hopper has pretty buttons, turn on hoper, put paint in, point at target, pull trigger???? If no firee, turn on gun, with fresh batts and whatnot!



Seriously tho, after i sobered up slightly more, maybe one of the planet worshippers will tell you how to ramp a gun, and not run a gun!

 

[SteRoberts]

http://www.planeteclipse.com/Folders/Downloads/Manuals/ETEGM06V2.pdf

RTFM haha

 

[Stencil]

Is this possible?

If so, how do I do it?
If its in the manual... I dont have one so dont say 'read the manual' lol

Thanks

Hold the trigger whilst turning on the gun.

Once on, hold the trigger until the "E" lights up.

Press the button once, for the "G" to light.

Press the trigger 3 times.

Press the button 2 more times.

All the letters should flash green.

Turn off.

Turn on.

Psp Ramping (i think)

 

[matt_don]

Thanks, I just followed your guide, everything seemed to go to plan, need to wait until tomorrow though before I can test it out