Question: 68 Mag, having problems with set up becuase of Kapp Cradle

[bigluch1]

Hey, I have a 68 automag with the stock trigger frame and a screw in verticle adapter in front of the trigger for regulators to screw in and the like. I recently purchased a Kapp Drop zone 2 cradle and with my current set up with my expansion chamber i figured that it would all fit nicely. I was wrong, and the only thing that seems to make the whole set up work is a gen-ex becuase its so small. Now I dont want to change my set up by either going witha direct line from the Nitro tank to the Valve of my gun and i also do not want to get a rail extender becuase i dont like the look and feel of it. Now if you know of any other piece like a gas through grip thats really small like the size of a gen-ex or something like that and is relativly cheap id love to know. (also the reason i dont want to use the gen-ex is becuase its borrowed and i hear that using a regulator on mag is not nesseccary)

Please help me out.....thank you

 

[rob_evanson]

If your planning to stay Co2 don't go direct to the Reg it'll suck up liquid like a Bounty kitchen towel, and yes you don't need a regulator because that part at the back of your mag is called a Regulator, so you aready have one.

It's not clear from your post, the cradle is for Co2 or Air? If it's air get rid of the front bottle mount and go direct that will eleminate the problem!

 

[Fleisher]

You say your using a "nitro tank" from that I guess its on air ,if so the tank must have a reg. already fitted, just run a line into your marker and forget the expansion set up as its not needed with air.