Pure energy

[tiffer]

I want to swap over my "guage" and fill nipple,as the nip is in an awkward position when filling.
I've taken them out and the holes appear to be the same,the threads are also the same,are there any issues?
I know I'll have to re~loctite them but am I missing anything else?
Cheers.

 

[Tom Allen]

make sure the bottom of the fill nipple hole is shaped the same as the gauge hole, as the valve in the fill nipple may require extra room..

 

[tiffer]

Cheers Tom the holes look identical,I've done it before but was just checking I haven't missed anything.

 

[Tom Allen]

should be ok then.