PSP mode problems on my E2

[fred1]

I have an E2 board with the new millennium software. I had to switch from PSP mode to Semi mode for a local league 2 weeks back. Last week end I switched back to the PSP mode and the BPS cap seems to have gone up.

When I used to pull the trigger during a ramp restart the marker would fire 3 shots. Now when I pull the trigger and restart the ramp the marker shoots 5 or 6 balls. And when I start mowing its just ridiculous.....

Problem is as well that the bolt keeps chopping paint now. I tried every hopper, Halo, Evo 2 and Revy and I get the same symptoms with every one of em. I chop so much that the paint goes all the way up the hopper's neck and in the case of the Halo covers the eyes and then it breaks down. The bolt seems to chop even when I'm not ramping...... When I first used the marker in PSP mode with the 15 BPS cap I had no chops. I tried bringing my timing up but it didn't work.

My questions are:

1) How do you bring the BPS cap down to 15? (It doesn't say anywhere that you can change the BPS cap)

2) Do you think that the paint chopping is related to this BPS increase?

3) Could it be a sear issue? If so what do I do to solve it?

 

[Iain]

1) if you use the button under the grip and go into timing there is a setting for off rof, try adjusting that down.

2) probably a silly question but are your anti chop eyes working

3) not sure but if it is firing paint and re-cocking properly would probably say not.

send Nicky T or 7lash a pm at planet they should be able to help.

 

[fred1]

Just got an email from Nick. Will be checking my filter settings tonight. He said it could be due to bounce. He also mentioned looking at the ROF to see if I was shooting faster than 15. He did say there is no way of increasing your ROF above 15 though. To be honest I am not sure the eye was working....

Cheers Iain.