Hi guys.
Well it's about time i sell on my baby, my Proto SLG 2010 in blue. I bought it new from fat bob's in late september i think (have the receipt somewhere if you want to see it) and since have bought both a spares kit for it and an on/off ASA. I am selling it as i would like a new toy, IE, a PMR. As you may or may not know, SLG's are fantastic starter markers, (i never regretted it) which aren't too complicated to maintain and work very well for their price.
Due to this being a long post, i have put all important things in bold.
Details:
01 Compact and Lightweight single tube body styling
02 composite 45 frame
03 single piece micro honed proto barrel
04 anti-chop break beam eye system
05 increased flow hyper3™ in-line air regulator
06 proto bottom-line with dovetail
07 Bolt silencer, decreases noise and kick
08 super low 145 psi operating pressure
09 New Smaller and Lighter Poppet solenoid
10 Aluminum Blade trigger
11 Proto dual-density injection sticky grip
12 led Program Control with 4 Tournament Modes
13 orbital rotating sear reduces wear
14 no-rise clamping feed-neck
15 self-closing Valve Spool technology 2 piece bolt
16 self-lubricating force button
BPS: 20+
MODES: SEMI, Full AUTO
Tournament modes: PSP, MILLENIUM
WEIGHT: 2.2 LBS = 998 GRAMS
MATERIALS: COMPOSITE, ALUMINUM
DIMENSIONS: L9.25”, H8.5”, W1.375”
TECHNOLOGY: SCV Spool
OPERATING PRESSURE: 145PSI
So more that 20BPS capable AND it's completely tournament ready and legal.
The marker has been well looked after, and is in very good condition. Only small flaw is at the tip of the marker underneath the barrel where a very small piece of plastic got damaged (only a couple of mm accross. It really is tiny). Had one hic-cup with it whereby the bolt wouldn't reset properly but that was fixed with a quick call to Tony at fatbob's (Thanks mate!) and turned out to just be an o-ring.
So marker works flawlessly, no leaks or real damage. Barrel is in absolute mint condition and was only used once i think. To be honest, the marker itself has only had 7 or 8 cases of paint through it so broken in but far from run down with much much more life in it.
The bolt has been stripped out and cleaned after each day of play and has been stripped completely twice (reg, eyes, everything) to ensure it was all working at it's best.
The spares kit is almost complete. There is one grip frame screw missing and the odd few o-rings. You may notice it is an UL spares kit however this makes little difference as the o-rings are identical for the majority. Only a couple of bits are different.
The on/off ASA is also a great addition, very helpful and makes airing it up and down a breeze. Just twist the knob and it cuts of the air from getting to the marker, then just push the bleed button on the SLG and it'll vent all the air in the gun. Shimples
Pictures below, i have also created a video hosted on youtube to show that it all turns on, airs up, the eyes work etc. etc. however i do not shoot it as my parents wouldn't be too happy
So, you are getting:
- Proto SLG 2010 in BLUE
- Box
- 3/4 packet lube
- Some allen keys (just pay a visit to poundland to get the rest)
- Barrel Sock
- Proto 11" 1 piece barrel
- Manual
- (POSSIBLY WARRANTY CARD IF I CAN FIND IT)
- Stock ASA
- On/Off ASA (installed)
- Very nearly complete spares kit
All for the price of £160. This will include postage fees (1st class recorded) and will be dispatched on either the day of or the day after payment is receieved.
I will accept paypal or cash on collection at Armogeddon V. I aim to sell this quite quickly so reasonable offers will be considered. I'm pretty sure anyone from the Warren Wood rangers and some of the SPS guys will vouch for me.
Thanks for reading all of this,
Cosford.
Well it's about time i sell on my baby, my Proto SLG 2010 in blue. I bought it new from fat bob's in late september i think (have the receipt somewhere if you want to see it) and since have bought both a spares kit for it and an on/off ASA. I am selling it as i would like a new toy, IE, a PMR. As you may or may not know, SLG's are fantastic starter markers, (i never regretted it) which aren't too complicated to maintain and work very well for their price.
Due to this being a long post, i have put all important things in bold.
Details:
01 Compact and Lightweight single tube body styling
02 composite 45 frame
03 single piece micro honed proto barrel
04 anti-chop break beam eye system
05 increased flow hyper3™ in-line air regulator
06 proto bottom-line with dovetail
07 Bolt silencer, decreases noise and kick
08 super low 145 psi operating pressure
09 New Smaller and Lighter Poppet solenoid
10 Aluminum Blade trigger
11 Proto dual-density injection sticky grip
12 led Program Control with 4 Tournament Modes
13 orbital rotating sear reduces wear
14 no-rise clamping feed-neck
15 self-closing Valve Spool technology 2 piece bolt
16 self-lubricating force button
BPS: 20+
MODES: SEMI, Full AUTO
Tournament modes: PSP, MILLENIUM
WEIGHT: 2.2 LBS = 998 GRAMS
MATERIALS: COMPOSITE, ALUMINUM
DIMENSIONS: L9.25”, H8.5”, W1.375”
TECHNOLOGY: SCV Spool
OPERATING PRESSURE: 145PSI
So more that 20BPS capable AND it's completely tournament ready and legal.
The marker has been well looked after, and is in very good condition. Only small flaw is at the tip of the marker underneath the barrel where a very small piece of plastic got damaged (only a couple of mm accross. It really is tiny). Had one hic-cup with it whereby the bolt wouldn't reset properly but that was fixed with a quick call to Tony at fatbob's (Thanks mate!) and turned out to just be an o-ring.
So marker works flawlessly, no leaks or real damage. Barrel is in absolute mint condition and was only used once i think. To be honest, the marker itself has only had 7 or 8 cases of paint through it so broken in but far from run down with much much more life in it.
The bolt has been stripped out and cleaned after each day of play and has been stripped completely twice (reg, eyes, everything) to ensure it was all working at it's best.
The spares kit is almost complete. There is one grip frame screw missing and the odd few o-rings. You may notice it is an UL spares kit however this makes little difference as the o-rings are identical for the majority. Only a couple of bits are different.
The on/off ASA is also a great addition, very helpful and makes airing it up and down a breeze. Just twist the knob and it cuts of the air from getting to the marker, then just push the bleed button on the SLG and it'll vent all the air in the gun. Shimples
Pictures below, i have also created a video hosted on youtube to show that it all turns on, airs up, the eyes work etc. etc. however i do not shoot it as my parents wouldn't be too happy
So, you are getting:
- Proto SLG 2010 in BLUE
- Box
- 3/4 packet lube
- Some allen keys (just pay a visit to poundland to get the rest
)- Barrel Sock
- Proto 11" 1 piece barrel
- Manual
- (POSSIBLY WARRANTY CARD IF I CAN FIND IT)
- Stock ASA
- On/Off ASA (installed)
- Very nearly complete spares kit
All for the price of £160. This will include postage fees (1st class recorded) and will be dispatched on either the day of or the day after payment is receieved.
I will accept paypal or cash on collection at Armogeddon V. I aim to sell this quite quickly so reasonable offers will be considered. I'm pretty sure anyone from the Warren Wood rangers and some of the SPS guys will vouch for me.
Thanks for reading all of this,
Cosford.
