Proto slg 08 not firing , help please

[den656]

Hi all , basically the slg I am selling I gassed it up today to check all was ok , and I am glad I did as I found it was not firing , there is definitely air getting into it and you can hear the hiss when you unscrew the bottle , the eyes appear to be working ok but have cleaned them just in case , and when you stick a finger down the feedneck the led lets you know they seem to be working fine , I have tried two new procells , so all I am getting at the moment is that it switches on ok ,the led is red then goes to green once you switch the hopper on and it feeds , but when you pull the trigger you hear an audible click from by the grip but then nothing and the led starts blinking green , so any ideas please ? Cheers all .

 

[tricky m]

Have you tried firing with eyes off? When was it last used? If it was a while ago. Pull bolt out relube and check it's moving freely. If thats ok. Could be reg sticking or set too low. Try turning up half turn. Relube reg and check seat. Rubber bit in adjuster. Pull that out and turn it round.

Also page 26 of manual gives you a couple more things to check first.

 

[alexander001]

did you get this sorted or are you still unsure, this has happened to my slg recently and i was also trying to sell it (they're nothing but problems) if so did you know why it was doing this?

 

[den656]

Hello chap , you are best off harassing foot, as I sold it to him as having this issue and he apparently had it back up and running very sharpish , good luck , den .

 

[alexander001]

Thanks, mine was a problem with the grip assembly (at least i think) and mines now gone to someone else. Thnak god!