Proto rail Help

[figment]

got the proto friday did all that needed doing with it lube and all that tryed it today and when it got to 1000psi on tank it stopped working and vented the air . any ideas what is wrong with it .

also how much paint can you get through useing the rail with 4500 fill on a 68cl bottle

 

[PBNinja101]

vented through gun or from bottle?

Bottle = burst disk

Gun = bolt stuck forward?

 

[figment]

from marker

it's only doing it when tank got 1000psi in it when above that it's ok no problems

 

[Lump]

if there is not enough pressure to run it then it wont work

 

[Magic_8ball]

Check your O rings...

 

[Ash - GI Sportz]

Hi

Is the problem occurring whilst you are filling the bottle on the marker? or whilst you are playing and the bottle pressure drops below 1000psi?

where exactly is the air escaping from?

thanks

Ash Chaplen
Technical Support
DYE Europe

 

[lemonadeX]

What lube did you use? Might've frozen up in the firing chamber if it wasn't suitable for the cold.

-Will

 

[Skeet]

Its probably less than 1000psi in teh tank, so...the gun cant fully cock and vents the gas.

Sounds normal mate...but might want setting up a bit better.

 

[figment]

thanks for the help guys got told to lower the dwell to 20 tryed it. works great now . once again thanks for the help.