proto asa

[mdking]

hi guys,

Ahad a small leak in the asa so i took it apart, all is wel. just wanted to know if the pin has to be screwed all the way in, in the asa knob?

it doesnt say in the manual...

thanks matt

 

[lemonadeX]

Check the O-Ring on your tank - I had a small leak out of the escape hole on the ASA and it turned out to be the tank O-Ring was slightly too small.

-Will

 

[mdking]

ok will do, does anyone know about the pin in the asa?

thanks

 

[lemonadeX]

Just screw the tank in as far as you can - There is usually a small gap (0.5cm or something) which can't be screwed into the ASA - thats normal.

-Will