problems with my 99 LED and a macdev

[ArrO]

Hello,

I am having major shootdown problems 280,280,180 with my angel/macdev conquest 02 , can anyone tell me what is wrong and what output my conquest must be.
I know that my angel is high pressure output about 800 on the macdev .
Maybe it is time to rebuild the reg. Is there anybody who uses a conquest on an Angel LED.

thanks

 

[Rabies]

The Conquest should have no trouble at all feeding an Angel - it's one of the highest flowing regs you can get.

What is the output pressure gauge on the Conquest doing when you shoot? It should hold stable as you shoot - if that much dropoff is caused by the reg, you'll see the gauge drop a long when when firing. If the gauge is stable, then the problem is downstream, either with the minireg or with something else in the marker itself.

If the reg is dropping off, then either the piston o-rings are bad or need lubrication, or there is something trapped in the seat causing a blockage. Empty the tank, strip the reg down, make sure it's all clean and free of dirt, regrease the o-rings (don't put grease on the seat or valve pin itself) and reassemble.