Having problems with my PMR SE. As soon as you switch it on it will fire one shot and then won't fire again until you switch it off and on again. After leaving it for about an hour it worked fine. Any ideas anyone?
Problems with a PMR
- Thread starter phillips900
- Start date
well i tried 3 new batterys and still no change. The only thing i could think of was the micro switch contacts got stuck. has anyone ever had a prob like this?
Hi
It sounds like you have the trigger adjustment set wrong. Basically the trigger is permanently holding down the micro-switch, so when you turn it on, it activates straight away, then because the micro switch isn't being released, no further shots can be fired.
Back out both of the trigger adjustment screws and check that there is no dirt in/around the trigger and reset the triggers pre and post travel.
Ash Chaplen
DYE Europe
It sounds like you have the trigger adjustment set wrong. Basically the trigger is permanently holding down the micro-switch, so when you turn it on, it activates straight away, then because the micro switch isn't being released, no further shots can be fired.
Back out both of the trigger adjustment screws and check that there is no dirt in/around the trigger and reset the triggers pre and post travel.
Ash Chaplen
DYE Europe