Pmr

[phill-w]

The macro-line on the pmr10 can it be moved so that it runs between the grip and reg rather than on the side as it is now?if so what do i need?

 

[JNR-XV]

You could cut the macroline a bit shorter and run the reg so that the elbow for the macroline is facing the grip, then the macroline should run under the triggerframe and to the grip, you will always have it out of one side tho due to the on/off. Or you could get the the DYE UL airport which is front porting and that will run it right to the reg and face it forward with nothing out of either side.

 

[phill-w]

cheers pal..i did see the dye ul airport on the justpaintaball website but it would make the angle from the new dye asa to the elbow on the reg a weird angle for the macroline to fit snug,would i be able to get a slightly longer piece of macroline which would put a slightly bigger bend in the macroline so it fitted better between both joints?does this make sense..

 

[Plexo]

Sure thing, with macro line its always better to go long and snug rather than short in any way.

I blew my macroline next to on purpose by running it too short ( i knew it was too short but i wanted to try) It makes a considerable pop and you waste a good amount of air. Someone on another forum went deaf for a day because he was holding the macroline by his ear when it happened...