PMR problems

[sforte]

ok so im having problems with my PMR, basically when I put my tank into the marker, and try to fire, nothing happens even tho theres a PSI of 2000. i was thinking it couuld be a broke o-ring but I cant find any, the tanks fine but what would be the problem with the marker?

 

[Henry8362]

is the pin in the asa? it is possble it fell out, if not are the eyes on when you try to fire (presuming your dry firing)

 

[sforte]

yea pin is there in the asa, and the eyes are fine, when i take the tank off you can hear the quick release of air if that helps.

 

[Spooly]

could it be a case of not enough lube ? as my bros slg wont fire if there not enough lube.....

 

[sforte]

its all lubed pretty well mate.

 

[Henry8362]

hmmm, put in a fresh decent battery?, is the reg assembled correctly?

 

[sforte]

looking at it further i now have air coming from the back of it, so im guessing it one of the o rings? would i be wrong?

 

[Spooly]

air coming from the back of where mate?

 

[Spooly]

right!

so its lubed well
battery is fresh and decent make (duracell , energizer) ?
and the pin is in the on/off asa

 

[Henry8362]

hmmm, if it's the bolt you speak of, then replace the o-ring, if not, im guessing it's the solenoid? in which case, you may need to send it back for repair if it's under warrenty?