pmr info
- Thread starter Bryan leaver
- Start date
i will be able to, so what stoping you need a bit more info ?? can you get on to the yellow blinking light when on the mode thing ?
just drop me a pm
just drop me a pm
For stock or PM7 board:
To test:
- Take grips off grip frame
- Put board into configuration mode (the blue box on the board - both switches are both in up position)
- turn on board (top button on grip frame)
- Pull trigger slowly until the light goes into rapid/flickering flashy yellow mode
- Pull and hold trigger until light goes out and then quickly pull the trigger three times.
- Wait until light flashes three times.
- The LED will cycle through a series of lights and stop at green.
- Switch configuration mode off. (the blue box on the board - switch 2 is in the down position)
- Turn off marker press and hold top button on grip frame)
To test:
- Switch on marker (hold top button on grip frame)
- Turn eyes off (hold bottom button on grip frame until light flashes red)
- Pull trigger alot, your marker is now MS ramping
If you are running a UL frame:
Instead of flickering yellow mode, the light will be a constant yellow. But rest of instructions will be the same.
Instead of flickering yellow mode, the light will be a constant yellow. But rest of instructions will be the same.
Almost perfect there Rayko... only you cant turn the marker off when itis in config. mode. It should read...
- Wait until light flashes three times.
- The LED will cycle through a series of lights and stop at green.
- Switch configuration mode off. (the blue box on the board - push switch 2 to the down position)
- Marker will act like you have just turned it on. (go through boot up and be ready to go, with eyes on)
- Close grips and you're good to go!
Its nice to see you were paying atttention at the tech class tho Rayko!
Regards
Ash Chaplen
Technical Support
DYE Europe
If you can get it to an NSPL or Proto KotH event, Paintball Warehouse or Heaven Paintball will be glad to help.
thanks sid but with the help of rayko i got it onto mill ramp .
but then look at my diary and saw i have a koth event next week so had to put it back to semi
but then look at my diary and saw i have a koth event next week so had to put it back to semi