pmi / angel q

[2scoops]

i'v got a 4500psi pmi fixed output air system that i use on my imp
would this air system work ok with a angel speed
someone said i might find it difficult to bring the velocity down on the speed if it shoots hot, its 800psi output

 

[Collier]

Should be fine!

Paul

 

[Rabies]

The actual operating pressure of the angel is set on the minireg, is it not? In the same way you don't feed 800psi straight into your impy, it goes through another reg first (usualy a maxxy) that takes it down to <200psi. Just as well, if you fed 800psi directly into either marker they would break quite spectacularly

So yeah, should be fine.

 

[2scoops]

i'm not saying that i will fed 800psi straight in to the marker but i was told the mini-reg you get with the gun could struggle to bring input pressure down enough if gun was shooting hot
ie on angel air you can turn down output to 550psi
i was told vert max-flo works better at bringing down psi than minireg on a angel

 

[Rabies]

Schitzverblumen... cheap english markers... pah! To be honest, any half-decent reg should be able to take 800psi down to under 200, so if WDP can't manage to find a decent reg to put on their markers, someone need to go and beat on them until they do