Pm7 - REG

[Gatman]

Hey,

Problem with the macroline and the reg. I think I'm going to need to cut the macroline smaller and also tighten up the EEG because it's loose anyone e can help me will I need to loclite the clamp things. Also how can I take macroline off

 

[Lump]

there is nothing wrong with the reg so whats the real problem

 

[Gatman]

I think I sorted it

 

[Gassy]

Have you tightened the bottom of the reg will an allen key so it stops moving

 

[Gatman]

yup I need to buy my bottle next week so I can check their is no leaks

 

[Gassy]

You may well have just knackered your reg,well done that man.

For gods sake do not put air into it,the reg should swivel where the silver macro elbow is.

 

[Gatman]

Ok, this is what happened the hyper 2 was loose so I was trying to get the macroline off so that I can tighten it so its no wobbling and leaking.

So I pulled out the macroline and tightened it and then put in the macroline again. but I dont know if the macroline is going to leak like inside the elbows if you know what I mean.

 

[SimonGiles]

The macroline should be fine.

If you can get a lift to Tonbridge one evening (or jump on the train) I have air you can put through the gun to check it is ok before you want to use it.

If the macroline does not seal for some reason then it is very easy / cheap to replace.

Some people leave their regs a little loose, so that the elbow sits where they want it. If it is only slightly loose this is not a problem - the reg will seal just fine and becomes locked (does not wobble) when aired up. That might be why you found it was slightly loose - nothing to worry about.

 

[Gatman]

ok mate, also I got my hopper so won't be long till I can come practice