PM7 Leaking

[Leezo]

I'm having a major headache witn my PM7. I was shooting away and then it suddenly started leaking air from between the frame and body. I stripped it down as per instructions and tried everything that was suggested in the manual. I even changed all the o-rings on the bolt. I've stripped the solenoid down and made sure it is all tight. The leak is coming from under the solenoid but cant understand how. Please help

 

[J@mes]

what sort of pressure are you putting into it? (turns on the hyper 2)

-james

 

[Leezo]

what sort of pressure are you putting into it? (turns on the hyper 2)

-james

I've not changed the factory set pressure on the reg or the in line reg. I use a standard low pressure bottle. Sorry just a bit confused, is that what you mean. The PM7 is new to me after upgrading from a Ion, so still learning about the internals and stuff
Leezo

 

[deadbox]

Replace and relube your bolt sail oring(middle one of the three on the bolt).

 

[Leezo]

I replaced all the O-rings on the bolt and still nowt

 

[Sid Sidgwick]

Contact Ash -Dye Europe on these boards mate fixed my PMR which had exactly the same problem

 

[Leezo]

Solenoid Sorted

Well, it was the solenoid. DYE Europe (Tommy)where excellent. Ash is away. The service was top notch. Any probs with your Dye gun, ring these guys straight away. I phoned up yesterday and I received 2 new solenoids today. Swapped old with new and it worked straight away. Dont know what is up with the solenoid but it has a new home......in my BIN lol
Thanks to everyone for your advice and help