pm 5

[phil alpha1]

Hi all

I hope someone can help me I am having a problem with my pm5 as in it wont fire. The lights change from green to red but it just doesn’t fire. I had just changed the marker from semi to ramp and after that it wouldn’t fire. Not that I checked that it was firing before, I just know it was when I put it in my kit bag.

Things I have tried.

I tried putting it back to semi.
I have checked that I had turned the eyes off.
I have changed the battery.
I undid the LPR and turned the air on just to check that the air was getting through.
The board I am using in my marker is a todeo board and I have gone through the sheet that I have got for it and checked what everything is set on.

Any help would be great.

Cheers
phil

 

[Dark Stranger]

Turn the eyes of and pull the trigger. Can you hear a faint clicking from the solenoid each trigger pull?

Open the grip frame and make sure that all the wire block connectors are attached.

Let me know

 

[Ash - GI Sportz]

Check that you havent accidentally altered the dwell. It should be at 18

What board are you using, I assume that it is an aftermarket board.

Ash

 

[phil alpha1]

thanks
pm is working again it was the battery i had tried a new battery in it already but this time it worked.


cheers for your help
phil

 

[boca]

dont use cheap batteries mate. also get some 9.6 volt batteries they work better than 9 volt