perfest e-blade settings and timing

[Rapid-snake]

hey guys,

a nother cocker one, but this time for the one that does work,

i got a nightkast cocker with ZeroB V1.1.

what im after is tips on getting the best ROF out of the marker,

any tips on timing it and the bored settings, eyes etc?

cheers

~snake~

 

[Andygoth]

I've had a few eblade cockers and by far the best thing to do is ignore all the settings and just set it to factory default fast and leave everything else alone.

I tried this after Belsales recomended it a few years ago and every cocker I've had since has worked perfectly on factory fast.

 

[Rapid-snake]

yeh i agree but thats only at 12 bps and thats wit eyes off,

 

[Andygoth]

No it isn't.

Factory settings only effect the timings for the cocking solenoid, breach sensor and trigger.

The eyes can be turned on and off as normal and the mode can be set how you want.

 

[jester22]

there is a sticky on here for setting it so it is in millenium settings.

 

[s1im]

As every marker is different the settings to get the max rof differs from each marker.
So one persons ideal settings won't match yours.

 

[Rapid-snake]

ok, well i barly get 12bps on factory fast,

must be the timing,

any tips o getting that right?

cheers

 

[Hawkins]

couple of things controll your max rof

theres several delays that are all factors to your max rof
the zerob 1.1 is capped at 15bps with the eyes on so to get it to 15 your gonna need to look into the timing of the marker ( this might make the marker chop of have drop off )

The Coff is the closed bolt delay on mechanical cockers ( not mq2 users ) it doesnt need to be as high as the hammer takes time to travel forward so something around 25ms depending on your springs. if you dont get drop off at highrates then lower it 2.

The Con is open bolt delay how long the bolt stays back for a ball to drop down ( this is over-ridden by the eyes) so when the eyes are off lower this to get higher rates of fire.

the Cdel is the dwell which you want to leave at 4

your then going to want to look into the filtering and it you want a monster turn the trigger filtering down, I had my full body orracle shooting 18bps on a 1.2 zerob but it was stupid and the yakuza squeezed out 22


Bring it to NvS ill hook you up just make sure your loader can feed fast
do this turn the eyes off, and you have a monster

Im the 20 year old with Hawkins written on my jersey suprisingly, if you dont see that then keep an eye out for a bad ass halfblock karni

 

[s1im]

yeah but that might be me using it once i've stolen it from you hawkins!

best thing is to get some one who knows what they are doing( hawkins will do!)to sit down and teach you what settings to use and what it does to your marker that way in the future you can then help others and the cycle continues!

 

[Rapid-snake]

yeh wish i could, would love to learn. haha, was going to get the TechT e-blade 202 dvd.

just a shame im not going to NvS , anyone going to pro-zone walkons that can give me a quick lesson?

cheers