Orracle Eblade1 Timing Settings

[U9Ly_KwaN]

Ok I know this should have been asked few times & people might just be tired/bored to even read & reply this thread

I've been reading http://www.moodypaintball.com/pages/tech/eblade.htm but then I'm missing few things that prevent me from timing the cocker correctly.

I have an Orracle E1 cocker which I've never shot yet.. I dont have air/chrono to time it myself & I dont know how to 'sweet-spot' the regulator setting.

Anybody can help me set this up without having the need to use air/chrono? Probably just gonna need the settings of the E1.. The set of numbers of the SON, COFF, etc... So that I can have a nice setting with a reasonably high ROF like 10-15bps efficiently... without having air deficiency or anything...

My Orracle has Black Magic regulator & am using 3000psi 1.1l air if thats any help?

Many thanks for your help guys...

 

[Muffin Man]

Contact planet, they will know matey.

 

[jahlad]

ok if it needs retiming its fairly simple to do as is sweetspotting the regs but unfortuantly you are not going to get that done without air and paint.

as for the eblade settings, put it in factory fast and leave it alone is what i say to most people that ask. its is uncapped with the eyes on, and if you have to turn the eye off it will still give you a resonable rof.

you really need to gas it up to see if it is set up ok, if not then you are eather going to have to do it yourself or find someone to look at it for you.
sending it to planet for a service is always an option, they will clean it, set everything up and send it back 100% tested and ready to rock.

 

[U9Ly_KwaN]

Cheers jahlad.. Unfortunately I dont have the time & cash to get it serviced at Planet... Tourney will be next Saturday I'm currently trying to set it up with Skeet He's been helping me much so far

I just shot some paints through it an hour ago! It felt like it was shooting like a dream for a few seconds on the Fast factory settings. But then the 2nd time I shot some more paints, its less efficient. Most likely its just because of the little air left in my mate's air cylinder. I just wish it'll work out great on the tourney day!

Cheers for the help so far guys! Very much appreciated