Orracle Air Problem (Black Magic + LPR)

[Munky_Gunn]

Hey guys,

been a while since i've been on here.

As usual, the gat's busted. Basically, no-matter how the reg's are adjusted, the gat does not re-cock. It's almost as if there's not enough air heading to it to re-cock. It shoots back about 5 or 6mm at the most. I've lubed the bolt, i've changed the battery, i've reset it to factory. I've tryed both my Zero B and my E1 boards.

Any suggestions?

 

[Lump]

LPR not wound in enough ?

 

[Munky_Gunn]

I've tried it any many possible positions man, everywhere from right out to right in. In honesty, i couldn't say for sure though, im not knowledgable enough. I believe its been suggested that the ram could be clogged up. Seem viable?

Cheers for the quick response.

 

[uk killer]

has the electric noid at the frount stoped working ?

 

[Munky_Gunn]

Just double checked. With the sear unplugged and no air, you can hear the noid running, so i'd assume it's still okay

 

[Lump]

ok do you know how to check the timming ?

 

[Munky_Gunn]

yeah man... i can do. I've reset it to factory fast, and tried fatory slow too.
Do you suggest i alter it?

 

[Revolt]

buy a decent gat and actually play some paintball

 

[Lump]

no not that timing the timing done with Allen key through the top of the body ? if the sear has worn then the timing may be out abit.

 

[Munky_Gunn]

At revolt: im working on it boyo... i can see me buying an ion or something (for all i play)

At lump: Inside timing, well, no, i can't say i do. Is it an easy thing to do. What would i be looking to do with it?