ok this might of popped up before but, how much oil do i need to put down my marker?? i use gun oil and when i come to fire it, do i need to wipe the oil off??
this is for an EVO 97
this is for an EVO 97
oiling my evo
- Thread starter cowface
- Start date
All I usually do is pop 2-3 drops of oil into the ASA, turn my bolt upside down, and fire a dozen or so shots through it. Then just put your bolt in the right way round, take your barrell off, and cycle a few more shots through it.
Try it!!! It stops the air firing through the barrel, therefore stops the oil firing through before it gets a chance to do it job!
At least, that's what someone told me.....
I've done it for a while, and have had no problems! Just remember to put it back in the right way before you play!!!!
At least, that's what someone told me.....
I've done it for a while, and have had no problems! Just remember to put it back in the right way before you play!!!!
In additon to that you need to grease your 3way shaft with DC33 every now and then. I do it and recommend it to everyone, especially those using a Shocktech bomb.
And the Bolt o-rings, gotta oil those.
You really should shoot about 30 dry fire shots after dropping in the oil to make sure it coats everything evenly.
You really should shoot about 30 dry fire shots after dropping in the oil to make sure it coats everything evenly.
ok, thanks all for the tips, what i did before, i got this gun oil container with 2 ends, 1 with a brush and 1 where u can sqeeze oil out, i got the brush and gave the bolt a couple of strokes, and then sqeesed a few drops down the chamber, and fired a couple of dryed shots,,
those statments might of sound weird in away,
Cowface
, and then sqeesed a few drops down the chamber, and fired a couple of dryed shots,,those statments might of sound weird in away,
Cowface