Nxt shocker blackheart setup

[renie]

i need help with my shocker nxt

it has a blackheart board fitted with standard HE bolt.

i need to know the best settings or a rough guide for the

Dwell & Bolt stick .. to prevent the first shot drop off but keeping efficency best as possible.

I belive its a Parker solenoid

 

[balf]

If you have no/15.4 bps cap your dwell would usually run about 10ms (28 chirps) bolt stick is gun specific, some use 0 some use max, if you have no trouble don't use it, play around with it you'll find the right setting. Personally I use 0, as I don't play much my gat is used by other people so I don't want the ABS kicking in over the chrono on an xball point or something, as I believe the black heart has a 10 second delay before the ABS kicks in.

If you have a BPS cap let me know and I'll get calculating or alternatively visit www.zdspb.com (I'll try and route out a direct link to the page in a bit) there's anything anyone would want to know on there.

it wasn't buried as far as I thought http://www.zdspb.com/tech/mguide/shockernxt/adj_electronics_bhnxt.html

 

[renie]

cheers mate ill give that a whirl but yeah im getting fsdo and ive got it set ten clicks from bottom at the moment Dwell set at 12ms

 

[balf]

It does vary a bit and also by other things like input pressure through the HPR (higher the input, the lower the dwell can be and vice versa), around 180-200psi and a dwell of 10-12ms on a Parker solenoid are about as average as it gets and around 14ms on a Humphrey.