nxt bolt back into marker... please help

[evoonline]

not a big problem.. taken the bolt out of my nxt for a lube down and just wanna confirm which bit goes into which to put it back in ive put it back together as it came out but its really tight going back into the marker. any reasons why or is it meant to be like this? a picture of someones NXT bolt out of marker would be super to compare this one to

cheers
Dave *Shocker n00b*

 

[balf]

the bolt guide (long bit) then the Bolt sleeve with the cut out bit to the back of the bolt guide, bolt(faceless end to the back, also has 2 orings and a lip, rather than the single o-ring and venturi face of the front of the bolt) the the firing can should be held on to the bolt and stick the cap back on, so you should have 4 pairs of o-rings down the bolt now.

It can be tight to go in but don't worry about it as the o-rings are static sealing so they can be tight.

 

[evoonline]

thanks balf. i think i had 1 bit the wrong way round. turned it right way and all has fitted back together nice and snug cheers m8

gonna air it up and ensure all is good.