nitro duck xstream air system

[Lovetone]

Couple of questions:

1 - i dont have the wrench supplied, can i use a normal wrench?
2 - which way to turn it to +/- pressure?
3 - can i turn it too far either way? ie can the adjustment "collar" come off the reg (meaning explosion or death or something drastic..or is it designed so this doesnt happen?)

4 - anyone going to staargate with the same thing help me out
or point me in the direction of a manual - not on the Nitroduck website...


cheers

Ian

 

[Lovetone]

Ok so ive found out that as you look at the pin valve, clockwise turns of the adjuster = +pressure, and counterclockwise is = -pressure

anyone help me out with the rest?

 

[Scars]

Any wrench will do but to save damage i would try and get hold of one of the proper spanners -

No your quiet safe turning it to extremes but i wouldn't advise pumping more than 850 out of it

 

[Lovetone]

wicked thanks that all i needed to know, probably gonna sit it on the middle and adjust from there, want about 700psi i think as this is going to be powering my ego

anyone going to staargate got the official nitro duck wrench i can borrow please?

thanks

Ian

 

[Scars]

It probably best to look in your manual and see what the optimum pressure of the ego reg is - set it - then treat it as a pre set til you change markers - a consistant pressure into a inline reg is better than a variance.

 

[Lovetone]

just says recommend HP preset so 800psi i guess then

 

[robtattoo]

I'm sure I've got a NitroDuck spanner or 2 kicking around. I'll send it down to Staargate with a mate (Gasman off the FB forum, pink DM5) You'll be fine using a big adjusty til then.

 

[Lovetone]

Rob thanks for that really appreciated
Hopefully ill see Craig around as im in his faction (Tokra) with the legend that is squid

cheers again!

Ian