Ninja Ultralite reg with no shims?

[Stu_B]

Hi Guys

So I bought a Clone 5S and knowing that they like a low tank output I took my Ultralite apart to remove some shims to find that there was none in there!

This reg came on a used bottle and I'd never checked it before as it always shot fine on my Etha.

So does anyone know what sort of output my tank will be putting out with the Ultralite and no shims at all inside, just the spring?

Thanks

 

[Care_Bears]

450, so all is good !!

 

[Stu_B]

Awesome cheers mate,

And it's safe to run with 0 shims as I thought I'd read it should always have 1 silver one in at least?

 

[red dragon]

I sure with all the shims out the UL Reg is putting out about 350/400 psi? Eclipse normally recommends 450/550 psi which is one shim as the UL Regs normally comes with 3 red shims hope this helps.

 

[Stu_B]

Thanks!

I haven't got any of the shims anyway so as long as it's safe I'll keep it as is, the Etha has been running fine and the Clone needs the lower pressure so that's awesome