Ninja Reg

[WildWayz]

Hi guys

I have a Ninja Pro Reg (I think) which has a user serviceable top half (and you can also change the pressure down from 850psi to 450psi by removing shims).

Anyway, i've been having issues with air coming from the grub screws when the reg gets cold (ie when shooting lots of paint quickly so the reg becomes cold). According to Ninja's website, I should clean the orings around the piston and re-lube it.
Trouble is, what lube should I be using?

I have Monkeypoo, Dow33, Dow55 and Spart Parts Gr33se.

Could I use them or what would I need?

Also, do you know where I can get spare o-rings for Ninja regs from?

Thanks!

James

 

[frenchy2475]

You can use any Dow 33 lube on ninja regs. It will just need a clean and relube. I would very much doubt you will need to renew any orings unless they a physically damaged. As its a pro reg I bet it's not old.

 

[WildWayz]

Thanks Frenchy - it is new, bought it from BZ back in December - was doing it 1st time I used it (in the cold)... doesnt do it when playing normally.

Thanks - will use DOW33

 

[frenchy2475]

That's pretty strange, I have 2 pro regs and they never leak. I'm sure a good clean and lube will sort it.