Nerve & Crappy Consistency

[Demonic69]

to start
Got her back from Anno and she was a bit slow.
Took her apart, greased her up and she wouldn't fire at all.
Sorted firing now, but the recharge is awful!
1 shot is fine, rest are poo unless I give it half a sec, then they're fine again.
Seems to recharge at the guage OK so Vert Max-flo is OK.
Anyone any ideas?
I've maxed the Dwell and Recharge on the board so I know they're OK.
I'm not sure but it may be leaking a little out the bolt/breach too.

Cheers

 

[Skeet]

You need to set teh LPR back up again...unless you have the correct guage tool to do this, you will just have to do it by hand...check on
http://www.zdspb.com/tech/index.html
Under Nerve...may tell you how to do it.

Or it migh ot be that at all....sounds like it though

 

[Demonic69]

Yeah, tried that, had it all the way in and out, still the same

 

[Bob]

try a different reg on it mate, it might still be the problem or atleast eliminate it entirly. A mates ION did the same thin when the pressure was to low but this was when we were shooting reballs

 

[Tom37]

but his reg looks sweet its the black and red one right?

 

[Gassy]

*cough*BATTERY*cough*

you probs tried it already

 

[Fish]

im with gasman... it happened on me karny, even though it said it had half battery left, it just wasn't happy... either that or the reg/bottle. normally i'd say the bottle isn't fully screwed in... but that cant really happening here. have you tried listening for leaks???

 

[Demonic69]

Reg, bottle and battery are fine.
The recharge at the guage is perfect, it will sit at 230psi while I shoot away with poor shots, I thin have to give it a sec to recharge

 

[Tom37]

the solenoid on my ir3 leaked, resulted in drop off to the extent that balls would go all of 20 feet. like fish said, could there be a leak? otherwise, send it to smart parts or somewhere to get it serviced