need to be retimed?

[iplaymindgames]

i noticed when i fire my cocker, sometimes theres a popping from the air and other times theres only a clicking from the cycling, any ideas on the cause and what it SHOULD be doing?

someone told me that perhaps i need to retime it, im using an eclass.. should i really retime it? if so, should i do it manually or through the grip?

 

[ally]

where do u live? Personally i would send it off, or take it in to a shop is if its an e-class orracle. But look here http://www.p8ntballer-forums.com/vb/showthread.php?s=&threadid=13722






ally

 

[Buddha 3]

Without having looked at it, which makes it hard to judge, it sounds like you haven't got enough pressure coming out of your LPR, so it ain't cycling too well. Try turning that up a notch, see what happens.

 

[jahlad]

forget all that to start with, i know it sounds really daft but change the battery and use good quality batterys.
it sounds from your breif desciption that the sear solonoid isnt tripping.
once you have tried that then its eather a case of fiddling with the lpr a little to make sure that is ok then you might have to adjust the sear lug but that aint to hard eather.

if you dont feel confident doing it then get someone that is

 

[Skeet]

You dont re-time Eblades!!
thats all done by the grip...if you have fiddled with the setup function within the grip..you can just set it to Factory fast med or slow....
the only way you re-time them is by altering the dwell time s and stuff...for faster firing etc...
Change your battery first as Jahlad said...as for cocking preassure...be careful...wind it back till it wont cock, then wind it in till it will, then give it an extra quarter turn in..just for good measure..if you put more than 100psi into the cocking solonoid it will fail.
Also, if you haven't I would strongly recommend RTFM!!!