Need Help

[pottts]

i have hust bought my first marker (Angel LCD 2001 Fly II), i was reading the manual, and noticed that i could connect the marker to the hopper. i have looked on the WDP website and found this LCD INTELLIFEED KIT CLEAR.

as i was reading the manual i also noticed that an optical thing is needed.

can someone please help, are they any good? where can i get the optical thingy? i would also like to know what hoppers i can connect this too?

thank you

 

[le-pig]

they work on revvys and spin the paddles each time you pull the trigger.they are powerd from the angels battery
not bad but a pain to set up

 

[Stan]

i have hust bought my first marker (Angel LCD 2001 Fly II)

I take it you no longer want my chrome cocker that you said you wanted.

 

[Skeet]

if you get a reloader kit for a revy, that will work just as well, it works by hearing the marker fire and spins up wheb it does....works great by all accounts

 

[John C]

Setting up a revvy on intelifeed is extremely easy. Its all in black and white in your manual.

You get your replacement sight rail which just needs to be screwed in to replace the normal one, it has a wire and plug on it which just needs to be plugged in to the board in your angel.

The other part of the kit is the wire which needs to be attached to the motor of the hopper. You need to open up the servo case inside your revvy and solder the wires to each terminal on the motor.

You disconnect and remove the circuit board and batteries and then put the rest of your revvy back together.

The wire you have just soldered plugs nicely into your sight rail, and you have a super light responsive hopper.

In answer to your other question the intelifeed can be used to control an egg hopper.
Unfortunately it requires heavy modification of the gun to make it work with anything older than an IR3.
Ive never done the modification myself and im not going to explain how to do it here.