Need help to I.D my board...

[ChiZZerS]

im thinking of getting a magno blade for my
shocker...

it is one of the older bulky shockers.
it says on planetecipse that you need the new LS board to
install a magno blade...
so how do i know/find out if i have an LS board

 

[bruce]

As a quick check

If you have a small red led on the front of the shocker then chances are is a ds board

if to you have a small green led on the side (if i remember) then its an Ls

the only real way to tell is to open the shocker up, and check the inside. Inside look where the trigger hits the board (you may have to undo the board from the base if it has a small black button switch its a DS , if it has a small metal lever switch its an LS


HTH

bruce

 

[Kaish]

You can see through the gap in the bottom of the body if you take the trigger frame off, saves you messing around with the board. Take off the trigger frame and look through the hole where the trigger activates the switch, as bruce said - if it's a little circular button it's a Dome switch.

 

[Skeet]

Is not its a Leaf Switch hencs LS...