Need autococker help quick!

[Legion]

hey, i have a '03 E1 Black Magic....

i have attached a full air tank on my marker and switched on the E-blade that has a new battery in it...

so i pull the trigger and it should shoot....

but all it does is re-cock, no air goes through the marker to shoot....

plz, anyone? any help?

 

[Edd Hobday]

Is your bolt in the right way up?

Is the cocking rod screwed in all the way?

What air system you using? Is the marker being starved of air?

These should give you somewhere to start
-EDD

 

[Ms Bossy]

Check that the bolt is the right way up, large hole should be at the bottom.


beat me to it Edd

 

[DangerousBrian]

as above or one of the following.

Crap battery ( some are rubbish out of the packet )

sear lug not set correctly

sear solonoid needs cleaning

 

[Ryan(pb alexandria)]

does the sear release the hammer? Does the cocking rod move at all? If it doesnt let me know.

Also check the bolt is the right way like they said.

 

[Legion]

the bolt is in he right way round.

the cocking rod is screwed ina ll the way

i am using a PMI 3000psi 72CU Air Bottle with 3000psi preset reg.

Note: the air tank is full.
Note: my other marker works fine with the air attached to it.

 

[Legion]

if it helps anyone..... i can show you through webcam and audio on msn messenger so you can see and hear whats it is doing....

if it will help... add me legion@codemaster.com

 

[Ryan(pb alexandria)]

you didnt answer my question mate.

does the cocking rod move?

 

[Legion]

when i fire it does move...

 

[Ryan(pb alexandria)]

Gas up the marker but do not cock it

Then push the cocking rod in to open the valve a little. Can you hear air coming out of it?