I am a newbie with a stock inferno field vert feed on CO2, and all necessary maintenance equipment, and pots+pack
I would like to know what may be a good thing to get next
I would like to know what may be a good thing to get next
n00b player
- Thread starter The One Mint
- Start date
welcome to the wonderful world of upgrades...
Hope you have your wallet handy...
You dont mention goggles + hopper - you may have forgotten but if you don't have them you will definitely need both. I'd recommend trying lots of goggles till you find a pair you really like and don't worry about the cost, since you'll have them strapped on your face for a good long while. For your setup a cheap 9v revvy should be OK hopperwise.
Other than that, spend your money on playing as much as you can for a while - you'll soon realise which things tick you off and need fixing...
Your next steps might be a new barrell, and expansion chamber, knee pads etc, but it all depends on how you play, jsut don't forget to check in the Classifieds forum for cheap deals before you buy anything
Have fun!
Hope you have your wallet handy...
You dont mention goggles + hopper - you may have forgotten but if you don't have them you will definitely need both. I'd recommend trying lots of goggles till you find a pair you really like and don't worry about the cost, since you'll have them strapped on your face for a good long while. For your setup a cheap 9v revvy should be OK hopperwise.
Other than that, spend your money on playing as much as you can for a while - you'll soon realise which things tick you off and need fixing...
Your next steps might be a new barrell, and expansion chamber, knee pads etc, but it all depends on how you play, jsut don't forget to check in the Classifieds forum for cheap deals before you buy anything
Have fun!
I have an Inferno Recballer - similar to yours, but with the "fancy" body.
I've added the following:
Double trigger - cos I like them!
Venturi bolt - supposedly improves accuracy?!?
Drop forward - to improve the firing position of the marker when held and balance the weight of the bottle better
Enhanced volume chamber with front bottle mount - so I could mount accessories on it! See below
Expansion chamber - screwed into new front bottle mount! This allows the gas to expand before entering the marker and will greatly improve your velocity consistancy
Barrel - Dye Excel, better than the stock one!
All that will hit your credit card fairly badly! So first off I'd recommend the barrel, followed by the bottle mount and an expansion chamber to improve your accuracy/consistancy. The rest is just preference - if you don't like the double trigger or drop forward, don't bother!
I've added the following:
Double trigger - cos I like them!
Venturi bolt - supposedly improves accuracy?!?
Drop forward - to improve the firing position of the marker when held and balance the weight of the bottle better
Enhanced volume chamber with front bottle mount - so I could mount accessories on it! See below
Expansion chamber - screwed into new front bottle mount! This allows the gas to expand before entering the marker and will greatly improve your velocity consistancy
Barrel - Dye Excel, better than the stock one!
All that will hit your credit card fairly badly! So first off I'd recommend the barrel, followed by the bottle mount and an expansion chamber to improve your accuracy/consistancy. The rest is just preference - if you don't like the double trigger or drop forward, don't bother!
i have an inferno heat the set up is as follows
inferno heat
double trigger (standad)
ventri bolt (a little softer on paint+increases accuracy)
planet drop forward (5 inch gets the marker in tighter to the body)
sprint pipe
10 inch dye stainless barrel (very accurate)
dye sticky grips
12 revvy (not one chopped ball since i have had this)
next upgrades
smart parts freak system
air system
possible gas thru grip
played with this baby for about 2years and its not let me down yetl.
only about +4/-4 over the crono(not bad for co2)
hope this gives u a few ideas
the dye exel barrels are well worth the money .
inferno heat
double trigger (standad)
ventri bolt (a little softer on paint+increases accuracy)
planet drop forward (5 inch gets the marker in tighter to the body)
sprint pipe
10 inch dye stainless barrel (very accurate)
dye sticky grips
12 revvy (not one chopped ball since i have had this)
next upgrades
smart parts freak system
air system
possible gas thru grip
played with this baby for about 2years and its not let me down yetl.
only about +4/-4 over the crono(not bad for co2)
hope this gives u a few ideas
the dye exel barrels are well worth the money .