Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

My Evo-X E2

Chinn

Chinn

Bristol Effect
Oct 28, 2004
488
5
38
32
South Wales
Hey guys
With my e2 its on semi mode and when i first fire the gun its in training mode but then when i start firing faster it starts actually firing. Is it something to do with the pressure? Any help will be appreciated.

Thanks
 
O

ollytheosteo

Guest
Lil Man said:
Hey guys
With my e2 its on semi mode and when i first fire the gun its in training mode but then when i start firing faster it starts actually firing. Is it something to do with the pressure? Any help will be appreciated.

Thanks
Click to expand...
When you say training mode, is the back block staying back when you hold the trigger back or is the gun just cycling very slowly? If it's the latter then the eye is the most likely culprit as the gun will slow right down if the eye isn't working. Try testing the eye through the menu or shooting with the eye turned off and see if it makes any difference:)
 
Chinn

Chinn

Bristol Effect
Oct 28, 2004
488
5
38
32
South Wales
i have turned the eye off and it is still in training mode untill i start firing it then shoots propely then sometimes misses a shot or two with training mode.
I am sending it off to Belsales tomorrow and they said they will have a look at it for me
 
Skeet

Skeet

Platinum Member
Sep 15, 2002
7,783
8
113
Most inappropriate thing on the Forum...
www.freewebs.com
Turn the gun on, turn the eyes off, air it up.

Hold the trigger down. Does the back block stay back?

If so, it is in CLASSIC mode, not regular semi.
Regardless, check the mode by entering the setup menu and ideally, set it to FACTORY FAST. This may cure it.

Does sound like its in classic though.

Also...what do you mean it starts in training mode, then starts firing normally? Is this aired up? If its in training mode, then it will stay in it...if you mean that the back block moves but you don't get a bang, then when you fire faster, its starts to bang, then see the above and defo set to Factory fast.

The other thing it could be, having thought about it for more than 5 seconds, is that your SON time is too low. This means that it may take more than one pull of the trigger to release the hammer.

So you may need to increase it (people lower it to try and speed the gun up). Factory setting for it is 4ms. You may also have your Lug wound in too far.
 
Chinn

Chinn

Bristol Effect
Oct 28, 2004
488
5
38
32
South Wales
Skeet i tryed it in both semi and classic and it still shot as if it was in training mode :s well i sent it to belsales now so hopefully it should be back soonish
 
Chinn

Chinn

Bristol Effect
Oct 28, 2004
488
5
38
32
South Wales
i put a brand new battery in it and it had been doing it for a while btw what is the SON time?

Skeet do u know what the latest version of the E2 is?
 
You must log in or register to reply here.
Top Bottom