mini spares kit

[funder]

Please can you tell me what comes in the players spares kit?

 

[Mclovin101]

Have a look in that thread mate a link with the players and team kits

Taken off this thread really good one http://www.p8ntballer-forums.com/vb/showthread.php?t=100899

 

[funder]

thanks for that.

 

[foot]

here is a list of what come in the players kit.

2 - Bottom Section (Air Transfer Tube) O-rings
4 - Top Section (Air Transfer Tube) O-rings
2 - Poppet Urathane O-rings
4 - Bolt Guide O-rings
2 - Solenoid Internal O-rings
1 - Bolt Tip O-ring
3 - Check Valves
1 - Poppet
1 - Battery Wiring Harness
1 - Air Transfer Plate Manifold Gasket
2 - Solenoid Front O-rings
2 - Solenoid Outer O-rings
2 - Bolt O-rings
2 - Front Cap Locking Screws
2 - Complete Detent Assemblies
2 - Grip Cover Screws
1 - Rear Grip Frame Mounting Screw
1 - Front Grip Frame Mounting Screw
2 - Post Travel Adjustment Screws
3 - HES Adjustment Screws
1 - Trigger Mounting Pin
2 - Rail Locking Screws
1 - Locking Lever Screw
4 - Air Transfer Plate Screws
2 - Main Circuit Board Attachment Screws
2 - Fore Grip Set Screws

 

[foot]

This is what come in the team kit.

5 - Bottom Section (Air Transfer Tube) O-rings
2 - Regulator OPP complete

2 - Regulator pin valve opener

2 - Regulator filter

2 - Regulator adj screw

3 - feed collar

15 - Top Section (Air Transfer Tube) O-rings

5 - Air transfer tube o-ring female bottom

10 - Poppet Urathane O-rings

5 - Bolt Guide cap O-rings

12 - Bolt guide o-ring small front

16 - Bolt guide o-ring large

5 - Solenoid Internal O-ring

5 - Bolt Tip O-ring

2 - Bolt complete w/o-rings

2 - Main spring

10 - Check Valves

4 - Poppet

4 - Battery Wiring Harness

5 - Air Transfer Plate Manifold Gasket

5 - Solenoid Front O-rings

5 - Solenoid Outer O-rings

2 - Solenoid piston

6 - Solenoid screw

10 - Front Cap Locking Screws

10 - Complete Detent Assemblies

6 - Grip Cover Screws

5 - Rear Grip Frame Mounting Screw

5 - Front Grip Frame Mounting Screw

5 - Trigger set screw short

5 - Trigger set screw long

5 - Trigger set screw w/magnet

2 - Trigger Mounting Pin

6 - Regulator mount screw

5 - Feedneck screw

10 - Foregrip Screws

10 - Foregrip rail retention screw

20 - Air Transfer Plate Screws

 

[funder]

Just bought a players kit, is there enough parts there to totaly rebuild the mini.

 

[Mclovin101]

Yeah looking at whats in it then i would of though so but i are you rebuilding it because it wont chorno

 

[foot]

Info given to me from a very good sourse explains that even a 10% wear on 0 rings can cause your mini to act up. If your plans are to use the kit to replace a few 0 rings the problems may still remain, i would replace them all, that way you know every thing is back to factory tolerences.

 

[Bolter]

Info given to me from a very good sourse explains that even a 10% wear on 0 rings can cause your mini to act up. If your plans are to use the kit to replace a few 0 rings the problems may still remain, i would replace them all, that way you know every thing is back to factory tolerences.

Just to add, thats probably the same for any gun.

 

[Thib]

For people don't not really aware of how it is working,
changing all o-ring is the easiest way for any marker.

If you know which one cause which problem, on the mini, you can sort it really easily, and parts cost nothing ...