mini problems

[Henry8362]

okay okay my mini has been having some velocity problems okay i made sure the pressure on the reg was 200psi as is recommened and adjusted the velocity but it would not go over 150-160 and when i did the counter clockwise turns to make it go up in velocity the bolt would cycle but no ball would be forced out? am i missing something here.. i cleaned the bolt check orings ,lubed etc checked the poppet made sure the plastic bit was dry but still nothing so whats up with it? anybody please

 

[foot]

have you changed the battery??

 

[Henry8362]

yup put a fresh one in this morning :/

 

[foot]

Even though you have checked them, replace the 2 outer bolt 0 rings and replace the 3 bolt guide 0 rings aswell, lube them lightly.
even if there is no signs of wear they can still cause issues.

 

[Henry8362]

Even though you have checked them, replace the 2 outer bolt 0 rings and replace the 3 bolt guide 0 rings aswell, lube them lightly.
even if there is no signs of wear they can still cause issues.

i shalll do this when i get some more air for my bottle hopefully it works

 

[foot]

if you dont have the correct or enough 0 rings, drop me a pm with your address and il pop some in the post for you.

 

[Henry8362]

dude thanks a lot ^^ urm i think i have plenty so it should be good

 

[Bolter]

I would guess at orings aswell.

Foot, you are a legend and a pleasure to have on the forums.

 

[Henry8362]

indeed he is i should have the orings but how do i get the current ones out :L any tips there not willing to budge :L

 

[Bolter]

indeed he is i should have the orings but how do i get the current ones out :L any tips there not willing to budge :L

If you have no nails like me, carefully use a pick to get them out.

http://cgi.ebay.co.uk/O-RING-PICK_W0QQitemZ400046732719QQcmdZViewItem?rvr_id=119458383349&rvr_id=119458383349&cguid=557780961290a0e204951fd5feedab6a