mini pllaying up

[sted_216]

hey i'm after some advice.
my invert mini was working fine till i unscwered my bottle. when replacing the bottle it now hisses like mad and the air is coming out the end of the barrel.

any ideas on how i can fix this problem???

cheers steve

 

[Bolter]

Hmm, either you churned up the bottle o-ring, or (more likely) you need to reset the poppet.Wind the back cap all the way in to seat the poppet correctly, then wind it back out to the desired velocity.

Let me know if this helps please.

 

[tom.m]

my mini is also spitting gas out of the barrel when i try and screw my gas back in ..
and know wont even turn on i have tryed changing my battery .. any answers ?

 

[3L1TE hax]

for the air hissing out try what bolter said, when you day it doesn't turn on what do you mean? even if the battery and board aren't connected to the sensor board a light still goes on. if the light doesn't go on check your battery in another device. and check all of the connectors in the front block

 

[Bolter]

for the air hissing out try what bolter said, when you day it doesn't turn on what do you mean? even if the battery and board aren't connected to the sensor board a light still goes on. if the light doesn't go on check your battery in another device. and check all of the connectors in the front block

The best bit is when they reply letting you know it worked, or didnt! Thats the best bit.

 

[NitroBall]

The best bit is when they reply letting you know it worked, or didnt! Thats the best bit.

I find its a common thing nowadays. As there is no further replies, one normally assumes it has done the trick. A thankyou note would have been nice.

 

[Lump]

I find its a common thing nowadays. As there is no further replies, one normally assumes it has done the trick. A thankyou note would have been nice.

are you getting old ? shakes fist at bloody kids

 

[NitroBall]

are you getting old ? shakes fist at bloody kids

I always thought i was the only kid around here