Millennium ramp settings for virtue board?

[Rupe]

Hi all, Just wondering if any one can help me figure out what 'Ramp Percentage' i need to use on my virtue board in order to acheve legal raming in the mellennium series? As you may have figured i have no idea what this ramp percentage is all about...
Cheers

 

[impamiizgraa]

Hi all, Just wondering if any one can help me figure out what 'Ramp Percentage' i need to use on my virtue board in order to acheve legal raming in the mellennium series? As you may have figured i have no idea what this ramp percentage is all about...
Cheers

Never made sense to me either. I programmed my by putting it over a chrono and increasing the percentage until it was 15.
You can put the 15 bps lock on...but i found tht was more like 12/13bps.
Alternatively...take it to campaign, and take it to the virtue tent? Should think they'd do it for you.

 

[Dskize]

just set your max bps to 15 (software) and your ramp percentage to 1 (max loader) the percentage ramping means if your pulling 10 bps and your ramping percentage is at 10% you ramp to 11bps or if your ramping at 50% you ramp to 15bps (pulling 10)..and so on .....certainly thats how ive always understood it ...

although the suggestion of getting virtue to do it sounds best ..

 

[Skeet]

Yup...just set it on 1 Max loader...then tourny lock...make sure you set your ramp start speed as well.

 

[Dskize]

1. Ramp activation (Blue) setting 7 or 8 (your risk ,8 is legal as you cant get 7.5 bps on the virtue and I dont know how nippy they are about that)

2.Ramp Percentage (White) setting 1 (max loader)

3.MROF (flickering Red) setting 11 (15 bps)

tourney lock on and your good to go