Microline Fitting

[Sajj101]

Microline Fitting

Is it possible to remove the straight microline fitting from a C.P. inline regulator and replace it with a swivel elbow?

Cheers

 

[Scars]

Yes...

Just get a spanner on it and replace - use low stregnth loctite on the threads when fitting the new Push fitting

 

[Sajj101]

Thanks Scars, managed to remove the straight fitting, but the elbow doesn’t go deep enough into the regulator, for the threaded parts to make contact.
Better stick the straight fitting back in.

 

[Graham-DV8]

PM Tom Allen, for some high pressure fittings, since he will be able to sort you out with what you need, used the fittings all year and not had a problem

 

[Sajj101]

Cheers, Will do

 

[Tom Allen]

I have an adaptor which extends the point where the thread starts, only £1 posted. Which will extend the elbow down 10mm.

 

[Graham-DV8]

Originally posted by Tom Allen
I have an adaptor which extends the point where the thread starts, only £1 posted. Which will extend the elbow down 10mm.

Was thinking that since I have a few, although coludnt think what to call them when I posted

 

[Sajj101]

Hi Tom,

P.M. Sent.

Cheers.