Membrane pad for Ion lucky Stage 4

[Marcus Geezer]

I have succesfully installed the lucky stage 4 board into my Ion and now realise what a bitch is to switch on and off using the Ion on/off button. It would seem the lucky on/off is recessed back when compared to the stock and blackheart boards.

I understand a membrane pad is the way forward, and with the lucky boards it seems it's just a case of getting the correct interconnection wire and a dye or lucky membrane pad, and off you go. No drilling, no soldering, just stick the pad on, connect the wire, and job done? Is this correct?

I've trawled through all the online shops to try and find a membrane pad and can't seem to find one at all, so was wondering if anyone can point me in the right direction.

Your help is much appreciated gents!

 

[ION_CRAZY]

you will need the membrane adapter, a little wire that links the board to the pad, once you have that you need a membrane pad. I have a membrane pad spare, £7

 

[Marcus Geezer]

Piccy

Do you have a piccy or a link to a stock picture for that membrane pad?

If not is it lucky or dye or another brand?

Oh, and is it £7 posted inc paypal fees?

 

[ION_CRAZY]

http://i1.ebayimg.com/01/i/000/9c/b6/3581_1.JPG

yeh, £7 total, the wire in the pic is for the T board

 

[JJA5]

http://ion.chiumanfu.com/index.php?main_page=page_1

the above link will hopefully give you a better idea! The membrane pad is self-adhesive so just stick to the grip and connect.

 

[Marcus Geezer]

Thanks everyone....

I have been sorted out now with a lucky membrane and a lead for the lucky stage 4 board, at a reasonable price. Thanks anyway Ion Crazy...

I've seen this before JJA5, and if I had access to a workshop, could solder without setting fire to the board, the marker and any passers by, then I might consider this.

It's enough for me to plug in the lead and stick it on the back!