Mega ego consistecy problems.

[Maddogwhitey]

hi
i played at the inter uni tournament last weekend. I had some mega problems with the consistency of my ego. at the chrono shots were varying between 40fps.

Now the only things i have modded on the marker are an slothball frm, and a slothball rammer cap. the reg is well broken in and the barrel (empire 2 piece ) was the best match for the paint. The day was cold ish and the paint was of good quality. this is really bugging me and i dont know how to fix it. suggestions please??

(ps has anyone got any good settings for the software??)

 

[john251282]

When was the last time you cleaned your reg?

 

[Maddogwhitey]

month ago, will do it again now.l

 

[Skeet]

Make sure your reg piston has got a "black bit" on teh thin end as well as teh o-ring on teh other.

Is your LPR Dwell Inline etc balanced?

 

[Beaker]

Originally posted by Skeet
Make sure your reg piston has got a "black bit" on teh thin end as well as teh o-ring on teh other.

Is your LPR Dwell Inline etc balanced?

Are you pi$$ed this early in the morning Skeet, good effort.

 

[Maddogwhitey]

Is your LPR Dwell Inline etc balanced? [/B]

sorry, what?? i havent changed any settings.

 

[Johnwilson]

what paint were you using, orange?

if so its prob not your ego, it had more dimples than a golf ball

 

[Beaker]

Originally posted by Maddogwhitey
sorry, what?? i havent changed any settings.

He means are the regs balanced in pressure to their optimum setting.

There are several threads about setting regs on here, it's best to do it each day from scratch.

 

[jahlad]

as skeet said id have a look at your inline reg and make sure that the piston seal is intact. and also that your shim stack is correct
)()()()()()()()(
the piston seal is the small black disc that sits on the top of the brass piston that the shims drop onto.
if the seal is damaged or missing then this will cause consistancy problems.

 

[Skeet]

Originally posted by Beaker
Are you pi$$ed this early in the morning Skeet, good effort.

Originally posted by jahlad
as skeet said id have a look at your inline reg and make sure that the piston seal is intact. and also that your shim stack is correct
)()()()()()()()(
the piston seal is the small black disc that sits on the top of the brass piston that the shims drop onto.
if the seal is damaged or missing then this will cause consistancy problems.

What was that you were saying Beaker me old chum?