Max flow ???

[P8ntbllr99]

I dont know anything thing about max flows so dont make that much, all heres my first question, whats the diferene performance wise between 3000 and the 4500, can you use 4500 tanks on 3000, can you buy just the regualtor or do you have to buy the tank with, and my last question is does anyone use max flows on matrix's if so are they and good on, and can you use max flows on matrix's?

i know its alot of questions but jus try to answer some of them please thank you

 

[Philip]

Max-flos, im my opinion is the best reg around.

A 4500 bottle can be used with a 3k reg, but you can only fill to 3k....you can buy the max-flo by itself(the asa screw in type, or you can buy the system which comes with a bottle).

You can use them on matricies. You can either keep the vert reg, or just use the max-flo as they are consistant enough.

 

[P8ntbllr99]

Philip do they sell jus the 4500 regulator system, if so for how much and where

 

[Pinky_81]

I would definately buy a 4500 bottle together with the MaxFlow... And beware: You have to modify your 3000 bottle to fit with a 4500 system!! And then you have to remember not getting over 3000psi all the time, and tell everyone that it only takes 3000 even though it is a 4500 system - MAYOR SAFETY ISSUE!!

By the way Max-Flow 4500 is SWEET dude!! Wouldn't get anything else!!

Pinky

 

[shifty]

max-flow on matrix

= sweet!!!

max flows work damn well on a matrix, but make sure u use them in conjunction with either the standard beehive or centerflag... the beehive comes stock but may suffer some problems after a year or so...
hope this helps
(matrix rules!!!)


(p.s. p8ntballr99 u can buy just the reg from either www.smartpartseurope.com or www.smartparts.com depending on where u live)

 

[P8ntbllr99]

but it says low pressure max flows can only go down to 100psi matrix's with a trinity can go down to 80psi, can max flows go down to 80psi or can you just not have it that low on a matrix

 

[Mr_Toads_Wild_Ride]

Anyone know where i can get a adjustment knob for my PBC anti chop reg? tried the matrix center

okay if u use a low pressure maxflow with your matrix beehive/centreflag reg like i do u set the maxflow to around 300 - 400psi the secondary reg then cuts this down to the 100-150psi range then the trinity will take it down to the 50-80psi range

 

[P8ntbllr99]

o ok thanx man

 

[p8ntballr07]

i would get a 4500 or a 300 maxflow anyday, if i had the money, so brian if u have the money id go for it